Hp NonStop G-Series Manuel d'utilisateur télécharger pdf (Page 145)

5157/5157 ACL S-Series DLT Subsystems Installation/Users Guide

Installing and Configuring the 5157/5157 ACL Digital Linear Tape Subsystem

for S-Series Servers

7-20

7.4.2 Daisy Chain Configuration

The right 68-pin SCSI port is daisy chained to the next drive in the

subsystem. On the next drive, the left most port is terminated

instead of being connected to the 50-pin SCSI port. Figure 7-11

illustrates how the 68-pin SCSI ports are connected.

Figure7-9 Two 5157 ACL’s Daisy Chained in the

Subsystem

NOTE: The SCSI ID’s on each drive need to be set at a different number.

Refer to Chapter 3; section 3.4.3 Changing the SCSI ID for the 5157 drive.

Refer to Chapter 5; section 5.3.1 Setting the SCSI ID for the 5157 ACL

drive.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 180 181

Pas de commentaire

Hp NonStop G-Series Manuel d'utilisateur Page 145