HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 316)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

logging email receiver-ip <ip address>

Use the logging email receiver-ip command to specify the IP address of the email server to use when

sending notification that an event matched the criteria configured using the logging email priority-level

command. See logging email priority-level [error | fatal | info | notice | warning] on page 315 for related

information. Use the no form of this command to remove a configured address.

Syntax Description

<ip address> Specifies the IP address (in dotted decimal notation) of the mail server to use

when sending logged messages.

Default Values

By default, there are no configured email server addresses.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example specifies an email server (with address 172.5.67.99) to use when sending logged

(config)#logging email receiver-ip 172.5.67.99

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 316