HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 340)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server location <string>

Use the snmp-server location command to specify the Simple Network Management Protocol (SNMP)

system location string. Use the no form of this command to return to the default value.

Syntax Description

“<string>” Alphanumeric string encased in quotation marks (up to 32 characters in length)

used to populate the system location string.

Default Values

<string> ProCurve

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example specifies a location of 5th Floor Network Room:

(config)#snmp-server location “5th Floor Network Room”

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 340