HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 433)

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

ETHERNET INTERFACE CONFIGURATION COMMAND SET

There are several types of Ethernet interfaces associated with the Secure Router OS:

• Basic Ethernet interfaces (e.g., eth 0/1)

• Ethernet sub-interfaces associated with a VLAN (e.g., eth 0/1.1)

• Ethernet switch (e.g., eth 0/1, 0/2)

To activate the basic Ethernet Interface Configuration, enter the interface ethernet command at the

Global Configuration Mode prompt. For example:

configure terminal

Router(config)#

interface ethernet 0/1

Router(config-eth 0/1)#

To activate the Ethernet Sub-Interface Configuration, enter the interface ethernet command at the Global

Configuration Mode prompt. For example:

configure terminal

Router(config)#

interface ethernet 0/1.1

Router(config-eth 0/1.1)#

To activate the Ethernet Switch Configuration, enter the interface range command at the Global

Configuration Mode prompt. For example:

configure terminal

Router(config)#

interface range ethernet 0/1, 0/2

Router(config-eth 0/1, 0/2)#

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 433