HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 586)

100

101

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

snmp trap link-status

Use the snmp trap link-status command to control the SNMP variable ifLinkUpDownTrapEnable (RFC

2863), which enables (or disables) the interface to send SNMP traps when there is an interface status

change. Use the no form of this command to disable this trap.

Syntax Description

No subcommands.

Default Values

By default, the ifLinkUpDownTrapEnable OID is enabled for all interfaces except virtual Frame Relay

interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), VLAN, T1 (t1 1/1), E1 (e1 1/1), DSX-1

(t1 1/2), G.703, serial (ser 1/1), DDS (dds 1/1), virtual Frame Relay (fr 1), virtual

PPP (ppp 1), SHDSL (shdsl 1/1), and loopback interfaces.

Functional Notes

The snmp trap link-status command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the Frame Relay interface:

(config)#interface frame-relay 1

(config-fr 1)#no snmp trap link-status

1 2 ... 581 582 583 584 585 586 587 588 589 590 591 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 586

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series