HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 705)

SROS Command Line Interface Reference Guide BGP Configuration Command Set

BGP CONFIGURATION COMMAND SET

To activate the BGP Configuration, enter the /jointfilesconvert/63229/bgp command at the Global Configuration Mode prompt. For

configure terminal

Switch(config)#/jointfilesconvert/63229/bgp

Switch(config-/jointfilesconvert/63229/bgp)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

description on page 927

exit on page 930

All other commands for this command set are described in this section in alphabetical order.

/jointfilesconvert/63229/bgp fast-external-fallover on page 706

/jointfilesconvert/63229/bgp log-neighbor-changes on page 707

/jointfilesconvert/63229/bgp router-id <ip address> on page 708

distance /jointfilesconvert/63229/bgp <external> <internal> <local> on page 709

hold-timer <hold time> on page 710

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 705