HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 709)

100

101

SROS Command Line Interface Reference Guide BGP Configuration Command Set

distance /jointfilesconvert/63229/bgp <external> <internal> <local>

Use the distance /jointfilesconvert/63229/bgp command to set the administrative distance for BGP routes. Use the no form of this

command to return to the default setting.

Syntax Description

<external> Sets the administrative distance for BGP routes learned via eBGP sessions. A

value of 255 means the route is not installed. Range: 1 to 254.

<internal> Sets the administrative distance for BGP routes learned via iBGP sessions. A

value of 255 means the route is not installed. Range: 1 to 254.

<local> Sets the administrative distance for BGP routes learned via the network command

and redistribution. A value of 255 means the route is not installed. Range: 1 to

254.

Default Values

By default external is set to 20, internal to 200, and local to 200. Normally, these default settings should not

be changed.

Command Modes

(config-/jointfilesconvert/63229/bgp)# BGP Configuration Mode

Functional Notes

This command sets the administrative distance for BGP routes. The administrative distance is a local

variable that allows a router to choose the best route when there are multiple paths to the same network.

Routes with smaller administrative distances are favored.

Usage Examples

The following example gives external BGP routes an administrative distance of 30, internal BGP routes an

administrative distance of 200, and local routes an administrative distance of 240:

(config-/jointfilesconvert/63229/bgp)#distance /jointfilesconvert/63229/bgp 30 200 240

1 2 ... 704 705 706 707 708 709 710 711 712 713 714 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 709

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series