HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 885)

SROS Command Line Interface Reference Guide Line (Console) Interface Config Command Set

speed <rate>

Use the speed command to specify the data rate for the CONSOLE port. This setting must match your

VT100 terminal emulator or emulator software. Use the no form of this command to restore the default

Syntax Description

<rate> Rate of data transfer on the interface (2400, 4800, 9600, 19200, 38400, 57600, or

115200 bps).

Default Values

<rate> 9600 bps

Command Modes

(config-con 0)# Console Interface Configuration Mode required

Usage Examples

The following example configures the CONSOLE port for 19200 bps:

(config)#line console 0

(config-con 0)#speed 19200

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 885