HP NetServer LXr 8500 Guide de l'utilisateur télécharger pdf (Page 39)

Chapter 2 PCI Hot Plug Utility for Novell NetWare

The PCI hold-down latch is used to keep the PCI boards in place and to

activate the PCI slot power switch and PCI LED board.

NOTE The HP NetServer is shown with its top cover removed for

clarity. Only the PCI Access Panel should be removed for this

procedure.

9. Open the PCI board-guide latch before removing the PCI board. See Figure

26.

CAUTION Do not bend the PCI board to remove it from the slot.

If the PCI board is full-length, the PCI board guide latch at the

rear of the PCI slot is used to hold the board in place. The

latch at the top of PCI board guide prevents the board from

moving during HP NetServer transportation and handling

when performing PCI Hot Plug operations.

PCI Board

Guide Latch

Open Latch

Figure 26. PCI Board Guide Latch

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Pas de commentaire

HP NetServer LXr 8500 Guide de l'utilisateur Page 39