HP TX1 POS Solution 200 Manuel d'utilisateur

HP TX1 POS Solution 200Maintenance and Service Guide

6. Connect the power supply to the adapter.7. Connect network cable and USB devices. Replace the port cover and turn on the tablet.NOTE: The HP EliteP

2 HP ElitePad 1000 G2 product descriptionCategory DescriptionProduct Name HP ElitePad 1000 G2Processor Intel® Atom z3795 1.60-GHz processor (core burs

Category Description●HP ElitePad 1000-proprietary docking connectorSensors●Accelerometer + eCompass●Ambient light sensor●Gyroscope●HapticsDocking HP E

3 Tablet external component identicationFinding your hardware and software informationLocating hardwareTo nd out what hardware is installed on the t

FrontItem Component Description(1) WWAN antennas (2)* (select models only) Send and receive wireless signals to communicate with WWANs.(2) Front webca

RearItem Component Description(1) Micro SD Card Reader/Micro SIM slot access holeAllows you to insert the end of a paper clip to open the access door

TopItem Component Description(1) Audio-out (headphone) jack/Audio-in (microphone) jackProduces sound when connected to optional powered stereo speaker

BottomItem Component Description(1) Speakers (2) Produce sound.(2) Product and regulatory information Displays product and regulatory information (sel

4 Illustrated parts catalogNOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your c

Item Component Spare part number* HP Magnetic Stripe Reader (not illustrated) K1K15AA* HP Fingerprint Reader (not illustrated) QZ672AALocating the ser

© Copyright 2015 Hewlett-Packard Development Company, L.P.Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under l

Tablet major componentsItem Component Spare part number(1) Display assembly (10.1-in., WUXGA (1900×1200), UWVA, 50% CG, 400-nit, active pen and MultiT

Item Component Spare part number(2b) Display LVDS cable(3) NFC antenna (includes double-sided adhesive) 747633-001 Button Kit, includes: 747634-001(4

Item Component Spare part number For use only in Japan 767885-001 For use only in the United States 767883-001(15) Broadcom BCM43241 802.11abgn 2x2

Power componentsItem Component Spare part number(1) 10-W AC adapter for use only on the HP ElitePad 1000 G2 (RC, V, 3-wire, wall-mount) 686120-001(2)

(continued)Item Component Spare part number For use in Israel 490371-BB1 For use in Italy 490371-061 For use in Japan 490371-291 For use in North

Spare part number Description686120-001 10-W AC adapter (RC, V, 3-wire, wall-mount)687946-001 2-cell, 21-Wh, 2.96-Ah, Li-ion battery for use only on t

Spare part number Description724301-261 Jacket keyboard for use in Bulgaria724301-271 Jacket keyboard for use in Romania724301-281 Jacket keyboard for

Spare part number Description744027-001 Retail Jacket left-side credit card reader board744028-001 Retail Jacket right-side credit card reader board74

Spare part number Description748599-005 HP hs3110 HSPA+ Mobile Broadband Module751285-001 HP Executive Tablet pen753735-001 Screw Kit for use only on

5 Removal and replacement preliminary requirementsTools requiredYou will need the following tools to complete the removal and replacement procedures:●

Safety warning noticeWARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on you

Grounding guidelinesElectrostatic discharge damageElectronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure

Packaging and transporting guidelinesFollow these grounding guidelines when packaging and transporting equipment:●To avoid hand contact, transport pro

Equipment guidelinesGrounding equipment must include either a wrist strap or a foot strap at a grounded workstation.●When seated, wear a wrist strap c

6 Removal and replacement procedures – tabletThe HP ElitePad 1000 G2 is also spared as a whole unit using an advanced exchange strategy using the spar

2. Place the HP ElitePad Service Tool on a at, sturdy surface.The HP ElitePad Service Tool is available using spare part number 714222-001.3. Move th

4. Open the retention gate (3).5. Place the tablet on the service tool and slide it (1) forward until the tablet docking connector engages with the se

6. Close the retention gate (1) and release the retention bar (2) to secure the tablet in the service tool.7. Place the suction cup (1) on the lower r

10. Firmly lift up on the suction cup to release the right side of the display assembly approximately ¼-inch from the tablet.11. Move the retention ba

16. Remove the suction cup (3).17. Slide the display assembly (1) to the left until the display assembly cables and connectors are accessible.18. Rele

a. Turn the display assembly upside down, with the bottom toward you.b. Detach the TouchScreen cable (1) from the surface of the display assembly. (Th

iv Safety warning notice

NFC antennaDescription Spare part numberNFC antenna 747633-001Before removing the NFC antenna, follow these steps:1. Turn o the tablet. If you are un

WWAN moduleDescription Spare part numberHP hs3110 HSPA+ Mobile Broadband Module 748599-005HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module 704030-005HP lt4112

4. Remove the WWAN module (4) by sliding it away from the socket on the system board.NOTE: If the WWAN antenna cables are not connected to the termina

WLAN moduleDescription Spare part numberBroadcom BCM43241 802.11abgn 2x2 Wi-Fi + BT 4.0 Combo Adapter 723677-005Before removing the WLAN module, follo

5. Remove the WLAN module (5).NOTE: If the WLAN antenna cables are not connected to the terminals on the WLAN module, protective sleeves should be ins

MicrophonesNOTE: The microphones are included in the Webcam/Microphone Kit, spare part number 762828-001.Before removing the microphones, follow these

Rear-facing webcamNOTE: The rear-facing webcam is included in the Webcam/Microphone Kit, spare part number 762828-001.Before removing the rear-facing

Power button boardDescription Spare part numberFor use only on computer models equipped with the Windows 8 Professional operating system 753976-601For

5. Detach the power button board cable (5) from the surface of the battery. (The power button board cable is attached to the battery with double-sided

NOTE: In the process of removing the power button board, the power button actuator may be accidentally dislodged from the bottom cover. To replace the

Table of contents1 Setting up the system ...

4. Remove the volume button board (4) and cable.NOTE: In the process of removing the volume button board, the volume button actuator may be accidental

Reverse this procedure to install the volume button board.Volume button board 45

Audio jack boardDescription Spare part numberAudio jack board (includes audio jack and cable) 747627-001Before removing the audio jack board, follow t

Vibrator moduleDescription Spare part numberVibrator module (includes cable, double-sided adhesive, plastic cover) 747630-001Before removing the vibra

BatteryDescription Spare part number2-cell, 30-Wh, 4.0-Ah, Li-ion battery (includes battery cable and WWAN/GPS main transceiver and antenna cable)7285

5. Remove the battery (6).Reverse this procedure to install the battery.Battery 49

System boardNOTE: The system board spare part kit is equipped with an Intel Atom z3795 quad core 1.60-GHz processor (burst up to 2.39-GHz; 2.0-MB L2 c

3. Release the ZIF connector (3) to which the WLAN ribbon cable is attached, and then disconnect the WLAN ribbon cable from the WLAN module.System boa

4. Remove the ve Phillips PM1.3×2.0 screws that secure the battery to the bottom cover.5. Lift the top edge of the system board (1) and swing it up a

7. Disconnect the docking connector cable (3) from the system board.8. Remove the system board.NOTE: In the process of removing the system board, the

WWAN module ...

Reverse this procedure to install the system board.Forward-facing webcamNOTE: The forward-facing webcam is included in the Webcam/Microphone Kit, spar

2. Release the ZIF connector (1) to which the forward-facing webcam cable is attached, and then disconnect the forward-facing webcam cable (2) from th

3. Remove the slot cover (4) by pressing it through the bottom cover.4. Remove the slot cover.Reverse this procedure to install the slot cover.Docking

1. Disconnect the vibrator module cable (1) from the docking connector cable.2. Disconnect the speaker cable (2) from the docking connector cable.3. R

7. Remove the docking connector cable (3).Reverse this procedure to install the docking connector cable.WLAN antennaNOTE: The WLAN antenna are include

c. Power button board (see Power button board on page 41)d. Battery (see Battery on page 48)e. System board (see System board on page 50)Remove the WL

WWAN/GPS auxiliary antennaNOTE: The WWAN/GPS auxiliary antenna are included in the Antenna Kits and include the WWAN/GPS auxiliary antenna cable and t

2. Remove the WWAN/GPS auxiliary antenna cable and transceiver (2).Reverse this procedure to install the WWAN/GPS auxiliary antenna.WWAN/GPS auxiliary

SpeakersDescription Spare part numberSpeakers (include left and right speakers and cables) 747629-001Before removing the speakers, follow these steps:

3. Remove the speakers (3).Reverse this procedure to install the speakers.Speakers 63

1 Setting up the system1. Set up the tablet. After charging the battery, press and hold the power button for up to 5 seconds until the HP logo is disp

7 Using Setup Utility (BIOS)Computer Setup, or F10 BIOS Setup (Basic Input/Output System), controls communication between all the input and output dev

Downloading a BIOS updateCAUTION: To reduce the risk of damage to the tablet or an unsuccessful installation, download and install a BIOS update only

8 Tablet specications Metric U.S.DimensionsWidth 17.80 cm 7.0 inDepth 26.10 cm 10.28 inHeight 0.92 cm 0.36 inWeight 0.68 kg 1.50 lbsInput powerOpera

9 Backup and recoveryTo protect your information, use Windows backup and restore utilities to back up individual les and folders, back up your entire

Using the Windows recovery toolsTo recover information you previously backed up, see Windows Help and Support for steps on restoring les and folders.

Changing the boot device orderTo change the boot order so that you can boot from an external device:NOTE: An external ash drive is required to perfor

10 Power cord set requirementsThe wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or fr

Requirements for specic countries and regionsCountry/region Accredited agency Applicable note numberAustralia EANSW 1Austria OVE 1Belgium CEBC 1Canad

11 RecyclingWhen a non-rechargeable or rechargeable battery has reached the end of its useful life, do not dispose of the battery in general household

IndexSymbols/Numerics3G antenna, spare part number 22AAC adapter cable, spare part number 19AC adapter, spare part numbers 17, 19ambient light sensor

2. (optional) Connect the HP ngerprint reader or HP MSR to the bracket (1) and (2). Then connect to the right or left side of the stand, using the in

Ggraphics, product description 5grounding guidelines 24guidelinesequipment 26grounding 24packaging 25transporting 25workstation 25Hhandle, spare part

Smart Card Reader Cover Kit, spare part number 21software information, locating 7speakerslocation 11removal 62spare part number 16, 21, 62standspare p

4. Secure the cables. Close the cable clip (6) and press the cable into the relief notch on the bottom of the stand (7).5. (optional) Mount the connec