Hp R818 Manuel d'utilisateur télécharger pdf (Page 126)

126

HP Photosmart R817/R818 User’s Manual

Resetting the Camera

If your camera does not respond when you press any

buttons, reset the camera.

1. Turn off the camera.

2. If you have an optional memory card installed, remove it

to eliminate the memory card as a possible cause of the

problem.

3. Remove the camera battery.

4. Press the straightened end of

a paper clip into the Reset

switch (the small hole located

above the battery slot, as

shown) until the switch is

depressed, hold the switch

down for three to six seconds,

then remove the paper clip.

5. Reinstall the battery and close

the Battery/Memory card door.

6. After verifying that the camera works without an optional

memory card, reinstall the card if you removed one in

Step 2.

Resetting the camera returns all settings to their factory

defaults. Images stored in memory or on a memory card are

retained. Date and time settings are also retained unless you

removed the battery for a prolonged period of time.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 199 200

Pas de commentaire

Hp R818 Manuel d'utilisateur Page 126