Hp NC365T 4-port Ethernet Server Adapter Manuel d'utilisateur télécharger pdf (Page 8)

Installing an adapter 8

Installing an adapter

Installation overview

This section describes installation precautions, how to install the adapter, and how to connect the network

cable.

WARNING: To reduce the risk of personal injury or damage to the equipment, consult the

safety information and user documentation provided with the server before attempting the

installation.

Many servers are capable of providing energy levels that are considered hazardous and are

intended to be serviced only by qualified personnel who have been trained to deal with these

hazards. Do not remove enclosures or attempt to bypass any interlocks that may be provided

for the purpose of removing these hazardous conditions.

WARNING: Installation of this adapter should be performed by individuals who are both

qualified in the servicing of computer equipment, and trained in the hazards associated with

products capable of producing hazardous energy levels.

This adapter is intended to be installed in Certified (UL or CSA) ITE equipment having

instructions for adding and removing user installed components such as PCI, PCI-X, and PCI

Express devices. Refer to the equipment instructions to verify that it is suitable for user installed

components and that it has the power capacity to support all of the installed components.

NOTE: Before removing the cover of your server, refer to the HP documentation for the proper

methods for installing a PCI Express card and avoiding electric shock hazards.

Preventing electrostatic discharge

To prevent damaging the system, be aware of the precautions you need to follow when setting up the

system or handling parts. A discharge of static electricity from a finger or other conductor may damage

system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the

device.

To prevent electrostatic damage:

• Avoid hand contact by transporting and storing products in static-safe containers.

• Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.

• Place parts on a grounded surface before removing them from their containers.

• Avoid touching pins, leads, or circuitry.

• Always be properly grounded when touching a static-sensitive component or assembly.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Hp NC365T 4-port Ethernet Server Adapter Manuel d'utilisateur Page 8