HP 2570p Manuel d'utilisateur télécharger pdf (Page 83)

Remove the system board (3) by sliding it up and to the left at an angle.

9. Remove the system board.

Reverse this procedure to install the system board.

Heat sink

Description Spare part number

Heat sink (includes replacement thermal material) 685508-001

Before removing the heat sink, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 44), and then remove the following components:

a. Service cover (see

Service cover on page 46)

b. Bluetooth module (see

Bluetooth module on page 48)

c. Speaker assembly (see

Speaker assembly on page 50)

Optical drive (see

Optical drive on page 51)

e. Hard drive (see

Hard drive on page 52)

f. Fan (see

Fan on page 54)

Component replacement procedures

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 126 127

Pas de commentaire

HP 2570p Manuel d'utilisateur Page 83