HP 4530s Manuel d'utilisateur télécharger pdf (Page 79)

Card reader board

Description Spare part number

Card reader board for use in 4530s models 646292-001

Before removing the card reader, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 47).

5. Remove the following components:

a. Bottom door (see

Bottom door on page 49).

b. Optical drive (see

Optical drive on page 50)

c. Keyboard (see

Keyboard on page 64)

d. Top cover (see

Top cover on page 66)

Remove the card reader:

1. Position the top cover upside-down with the front toward you.

2. Remove the tape that secures the cable to the Touchpad button board (1).

3. Disconnect the cable from the connector on the Touchpad button board (2).

4. Remove the two Phillips PM2.5×5.0 screws (3) that secure the card reader board to the top cover.

Component replacement procedures

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 149 150

Pas de commentaire

HP 4530s Manuel d'utilisateur Page 79