HP ProLiant ML150 Manuel d'utilisateur télécharger pdf

Configuring the Server

1. Connect all peripherals:

— Keyboard

— Mouse

— Monitor

— UPS

NOTE: Refer to the HP ProLiant ML150 G2 Server Support CD.Use the CD

for updated information about the server and as a reference for any additional

information not provided in this installation sheet.

2. Determine the server BIOS version:

a. Power up the server.

b. Press the Esc key at the HP logo screen.

c. Note the server BIOS version during the POST boot-up.

d. Verify the server BIOS version against the latest BIOS

version listed for this server on the HP website:

http://www.hp.com

e. If you do not have the latest BIOS, update the BIOS now.

Refer to the HP ProLiant ML150 G2 Server Maintenance

and Service Guide available on the HP website:

http://www.hp.com

3. Install the desired operating system (OS). HP drivers and

utilities can be found on the support CD. For the latest drivers

and information on supported operating systems, refer to the

HP website:

ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf

Default Boot Priority

By default, the server searches for boot devices in the following

order:

HP ProLiant

ML150 G2 Server

Installation Sheet

Read instructions completely before

beginning installation procedure.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

Microsoft, Windows, and Windows NT are U.S. registered trademarks of

Microsoft Corporation. Intel, Pentium, and Itanium are trademarks or registered

trademarks of Intel Corporation or its subsidiaries in the United States and

other countries. UNIX is a registered trademark of The Open Group. Linux is a

U.S. registered trademark of Linus Torvalds.

HP ProLiant ML150 G2 Server Installation Sheet

First Edition (June 2004)

Part Number 368149-001

1. Legacy Floppy Drives (flexible diskette drive)

2. USB FDC (external USB floppy diskette drive)

3. IDE 0 (IDE CD-ROM drive or hard disk drive)

4. PCI SCSI (SCSI or SATA hard disk drive)

5. PCI LAN (embedded LAN)

1 2 3 4 5 6

Résumé du contenu

Page 1 - ML150 G2 Server

Configuring the Server1. Connect all peripherals:— Keyboard— Mouse— Monitor— UPSNOTE: Refer to the HP ProLiant ML150 G2 Server Support CD.Use the CDf

Page 2 - Component Identification

Component IdentificationFront Panel ComponentsHot-Plug ModelItem Description1 CD-ROM drive2 CD-ROM drive activity indicator3 CD-ROM drive eject button

Page 3 - Accessing Internal Components

System Board ComponentsItem Description Code1 24-pin power connector J202 3-pin CPU fan connector J263 5-pin power connector J194 Processor 1 socket U

Page 4 - Opening the Front Bezel

Opening the Front BezelInstalling Mass Storage DevicesCAUTION: Drives can be damaged by static electricity. Beforehandling drives, touch an unpainted

Page 5 - Installing Memory

Installing MemoryThe following guidelines must be followed when memorymodules are being added or replaced:y Use only PC2700 333-MHz registered, ECC, D

Page 6 - Installing a Second Processor

Installing a Second ProcessorWARNING: Align pin 1 on the processor with pin 1 on theprocessor socket, or pin damage will occur.WARNING: Be sure that