Hp DeskJet GT 5810 Manuel d'utilisateur télécharger pdf (Page 10)

Important Ink Information

Lock and unlock ink valve to control ink ow

Lock and unlock the ink valve on the front of the ink tank to control the ow of ink to the printer.



Unlock

Before you print, make sure the ink valve is unlocked.

Turn valve left to vertical position to unlock.



Lock

To prevent ink leakage, make sure the ink valve is locked

before you attempt to move or tilt the printer. Turn valve

right to horizontal position to lock.

To ensure that your printer functions properly, you will need to make sure that the ink valve is unlocked for printing

and locked for moving. You should also maintain proper ink levels in the ink tanks when you are printing.

Maintain proper ink levels

Use the ink level lines on the ink tanks to determine when to ll the tanks and how much ink should be added.

Never print when any of the ink tanks has less than the minimum amount of ink. Printing with too little ink or lling

tanks with too much ink can damage the printer and aect print quality. Make sure you match the color of the ink

to the color on the ink tank when you rell an ink tank. See the Start here booklet for instructions on how to ll the

ink tanks.



Minimum ink level

Ink level should never go below the minimum line.

Printing with ink level below the minimum line may cause

damage to your printer.



Maximum ink level

Do not ll ink above the maximum line. Any ink level

above the maximum line may cause ink leakage. When

you rell, some ink will be left over in the ink bottle. You

can save the remaining ink by storing the ink bottle in a

dry cool place for future relling.

Note: Product service or repairs required as a result of lling the ink tanks improperly and/or using non-HP ink will

not be covered under warranty.

English

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Hp DeskJet GT 5810 Manuel d'utilisateur Page 10