HP Pavilion 27q Display Manuel d'utilisateur télécharger pdf (Page 19)

3. Select Save and Return to save your setting and close the Viewing Mode menu. Select Cancel if you

don’t want to save the setting.

4. Select Exit from the Main menu.

WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper

workstation, setup, posture, and health and work habits for computer users, and provides important

electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo.

Using Auto-Sleep Mode

The monitor supports an OSD option called Auto-Sleep Mode that allows you to enable or disable a reduced

power state for the display. When Auto-Sleep Mode is enabled (enabled by default), the monitor will enter a

reduced power state when the host PC signals low power mode (absence of either horizontal or vertical sync

signal).

Upon entering this reduced power state sleep mode, the monitor screen is blanked, the backlight is turned o,

and the power LED indicator turns amber. The monitor draws less than 0.5 W of power when in this reduced

power mode. The monitor will wake from the sleep mode when the host PC sends an active signal to the

monitor (for example, if you activate the mouse or keyboard).

You can disable the Auto-Sleep Mode in the OSD. Press the Menu button on the back panel to open the OSD. In

the OSD select Power Control. Select Auto-Sleep Mode and then select O.

Using Auto-Sleep Mode 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Pas de commentaire

HP Pavilion 27q Display Manuel d'utilisateur Page 19