Hp USB Dual Output USB Graphics Adapter Manuel d'utilisateur télécharger pdf (Page 23)

B Technical Specifications

NOTE: All performance specifications are provided by the component manufacturers. Performance

specifications represent the highest specification of all HP's component manufacturers' typical level

specifications for performance and actual performance may vary either higher or lower.

HP Dual Output USB Graphics Adapter

Host Interface USB 3.0 (backward compatible to USB

2.0); USB cable included

Video Interface DisplayPort; DVI-I or VGA

Connectors Video output: 1) DisplayPort and 2) DVI-I 24pin + 5pin Female Connector or VGA

HDDE 15pin Female Connector

Host upstream link: USB 3.0 Micro B Connector

Connectivity Up to 6 monitors can be supported with 3 adapters on a computer

RAM 8M x 16 DDR Synchronous DRAM (SDRAM)

Power Mode Bus-powered

Operating System Support Refer to

System Requirements on page 3

Supported Modes Extend (Default), Mirror, Primary Display

Resolutions, Refresh Rate, and

Color Depth

Refer to

Adjusting Resolution, Color Depth and Refresh Rate on page 10

Housing Plastic

Dimensions 9.45 (L) x 8.14 (W) x 2.01 (H) cm 3.72 (L) x 3.2 (W) x .79 (H) inches

USB Cable USB 3.0 Y cable, 1.8m (6 ft)

Operating Temperature 0-40°C 32-104°F

Storage Temperature -10~+70°C 14~+158°F

Operating Humidity 20% to 80%

Non-Operating Humidity 5% to 95%

EMC

●

FCC Part 15 Class B, IC ICES-003

●

CE (EN55022, EN61000, EN55024)

Agency Approvals FCC, CE, VCCI, KC, C-Tick, UL

RoHS RoHS compliant

HP Dual Output USB Graphics Adapter 17

1 2 ... 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

Hp USB Dual Output USB Graphics Adapter Manuel d'utilisateur Page 23