Hp ProLiant DL120 G6 Server Manuel d'utilisateur télécharger pdf (Page 17)

Operations 17

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI riser board assembly.

1. Power down the server (on page 15).

2. Remove the server from the rack (on page 15).

3. Remove the access panel (on page 16).

4. Disconnect all internal cables connected to existing expansion boards.

5. Remove the PCI riser board assembly:

a. Remove the T-10 screw.

b. Remove the T-15 screws.

c. Remove the riser board assembly.

Install the PCI riser board assembly

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI riser board assembly.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 112 113

Pas de commentaire

Hp ProLiant DL120 G6 Server Manuel d'utilisateur Page 17