Hp ProLiant DL360 G6 Server Manuel d'utilisateur télécharger pdf (Page 24)

Operations 24

Lift the assembly to unseat the PCI riser boards, and then remove the assembly.

Install the PCI riser board assembly

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI riser board assembly.

1. Align the PCI riser boards with the corresponding connectors on the system board, and then install the

assembly.

2. Tighten the four PCI riser board assembly thumbscrews.

3. Install the air baffle (on page 22).

4. Install the BBWC battery pack, if removed ("Installing the BBWC battery pack" on page 57).

5. Install the access panel (on page 21).

6. Slide the server into the rack.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 126 127

Pas de commentaire

Hp ProLiant DL360 G6 Server Manuel d'utilisateur Page 24