Hp ProLiant DL360e Gen8 Server Manuel d'utilisateur télécharger pdf (Page 32)

Hardware options installation 32

Prepare the drive.

3. Install the drive.

4. Determine the status of the drive from the drive LED definitions (on page 12).

To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website

(http://www.hp.com/go/smartstorage/docs).

Drive cable options

For more information about product features, specifications, options, configurations, and compatibility, see

the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).

Two-port SATA cable option

When this cable option is installed in the eight-bay drive cage, the server supports the six-drive SATA

configuration. In this configuration, drive bays 1 through 6 are populated, while drive bays 7 and 8 contain

drive blanks.

To connect the cable option:

1. Power down the server (on page 16).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Do one of the following:

o Extend the server from the rack (on page 16).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 113 114

Pas de commentaire

Hp ProLiant DL360e Gen8 Server Manuel d'utilisateur Page 32