Hp ProLiant DL585 G2 Server Manuel d'utilisateur télécharger pdf (Page 45)

Hardware options installation 45

CAUTION: If only one power supply is installed, do not remove the power supply unless the

server has been powered down. Removing the only operational power supply will cause an

immediate power loss.

NOTE: If you remove or replace the primary hot-plug power supply, use the T-15 Torx

screwdriver provided with the server to remove the shipping screw. It is located just under the

port-colored plastic handle of the power supply unit.

1. Remove the power supply blank.

2. Install the power supply, and lock the lever.

3. Connect the power cord to the power supply.

4. Secure the power cords to the retaining clip.

5. Connect the power cord to the power source.

6. Be sure that the power supply LED is green.

7. Be sure that the front panel external health LED is green.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 103 104

Pas de commentaire

Hp ProLiant DL585 G2 Server Manuel d'utilisateur Page 45