Hp ProLiant ML310 G4 Server Manuel d'utilisateur télécharger pdf (Page 30)

Hardware options installation 30

Remove the applicable bezel blanks from the bezel.

9. Install the access panel (on page 17).

10. Install the bezel ("Unlock the tower bezel" on page 17).

11. Power up the server (on page 16).

USB tape drive

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays

are populated with either a component or a blank.

1. Power down the server (on page 16).

2. Remove the bezel ("Unlock the tower bezel" on page 17).

3. Remove the access panel (on page 17).

4. Remove the applicable media bay blank.

5. Install the tape drive.

6. Secure the USB tape drive cable to the USB tape drive cable connector on the system board

("System board components" on page 10).

7. Remove the applicable bezel blanks from the bezel.

8. Install the access panel (on page 17).

9. Install the bezel ("Unlock the tower bezel" on page 17).

10. Power up the server (on page 16).

Full-height tape drive

1. Power down the server (on page 16).

2. Remove the bezel ("Unlock the tower bezel" on page 17).

3. Remove the access panel (on page 17).

4. Remove the media bay blanks.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 87 88

Pas de commentaire

Hp ProLiant ML310 G4 Server Manuel d'utilisateur Page 30