Hp ProLiant SL230s Gen8 Server Manuel d'utilisateur télécharger pdf (Page 31)

Hardware options installation 31

Press and hold the processor retaining bracket in place, and then close each processor locking lever.

Press only in the area indicated on the processor retaining bracket.

10. Remove the thermal interface protective cover from the heatsink.

CAUTION:

Heatsinks specified for processor 1 and 2 are not interchangeable. Be sure to note

the appropriate orientation on the heatsink label.

CAUTION: Heatsink retaining screws should be tightened or loosened in diagonally opposite

pairs (in an "X" pattern). Do not overtighten the screws as this can damage the board, connectors,

or screws. Use the wrench supplied with the system to reduce the possibility of overtightening the

screws.

11. Install the heatsink:

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 109 110

Pas de commentaire

Hp ProLiant SL230s Gen8 Server Manuel d'utilisateur Page 31