Hp BH3710 Manuel d'utilisateur télécharger pdf (Page 44)

H. Use RIS to install Microsoft Windows 2K Adv Server to the Blade

Server

1. Connect stand-alone RIS server to same network as the bc1100 is on. If possible,

disconnect all other systems from network. This will ensure that there are no possible

network conflicts. Connect a USB keyboard and mouse to the bh7800. Also connect

a VGA monitor to the bh7800.

2. Remove all mass storage devices from the blade server including the USB floppy

drive, the USB CD-ROM drive and any storage blades currently installed.

NOTE: This process cannot be completed using the RMC text console

because the Microsoft Windows installation changes to a Graphical

User Interface (GUI) after the reboot. The text console is not a

GUI device. Thus, a local VGA monitor, USB keyboard and

mouse are required for these steps.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 68 69

Pas de commentaire

Hp BH3710 Manuel d'utilisateur Page 44