Hp E 800 Manuel d'utilisateur télécharger pdf (Page 19)

Setting Up the HP NetServer E 800

1. Open the ZIF (Zero Insertion Force) lever on the processor socket.

The ZIF lever must open completely to a full 90

before removing the

terminator from the socket.

2. Remove the terminator from the processor socket.

ZIF

Lever

Processor Socket

Terminator

NOTE Retain the terminator for future use. The NetServer will not

operate properly if using only one processor with no

terminator installed.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Hp E 800 Manuel d'utilisateur Page 19