Hp RP7 Retail System Model 7100 Manuel d'utilisateur télécharger pdf (Page 17)

3. The stand can now be repositioned in either horizontal (1) or standing (2) position.

Figure 4-4 Repositioning the Stand

Connecting the Base Station

You can connect the Base Station to a terminal, PC, or other host device. Turn off the host before

connection and consult the manual for that equipment (if necessary) before proceeding. Connect the

interface cable before applying power to the Base Station.

NOTE: The scanner can also be powered by the terminal. When powered by the terminal, the

battery charger is automatically set as slow charge.

For some specific interfaces or hosts or lengths of cable, the use of an external power supply may be

recommended for full recharging capability (refer to

Technical Specifications on page 27 for more

details).

Base Station Connection: Fully insert the Interface (I/F) Cable (1) connector into the port on the

underside of the Base Station (2).

Host Connection: Connect the Interface (I/F) Cable (1) to a USB port on the host.

Connecting the Base Station 11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

Pas de commentaire

Hp RP7 Retail System Model 7100 Manuel d'utilisateur Page 17