Hp Z210 Convertible Minitower-Workstation Manuel d'utilisateur télécharger pdf (Page 47)

Installing a DIMM

To install a DIMM:

1. Follow the procedures described in

Preparing for component installation on page 34 to prepare

the workstation for component installation.

2. Push gently outward on the DIMM socket levers as shown in the following illustration.

Figure 7-1 Opening DIMM socket levers

3. Align the DIMM connector key with the DIMM socket key, and then seat the DIMM firmly in the

socket (1) as shown in the following illustration.

CAUTION: DIMMs and their sockets are keyed for proper installation. To prevent socket or

DIMM damage, align these guides properly when installing DIMMs.

Figure 7-2 Seating the DIMM

ENWW

Installing a DIMM

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 67 68

Pas de commentaire

Hp Z210 Convertible Minitower-Workstation Manuel d'utilisateur Page 47