HP Network Cables LH 3 Manuel d'utilisateur télécharger pdf (Page 24)

Chapter 3 Installing LH 4 Components

Figure 3-5. Removing the Memory Cards

3. Position the memory board on a static-dissipating work surface and remove

the DIMMs from their packing materials.

4. Remove a DIMM from its container, handling the module by its ends; do

not touch the pins. Lay it on an anti-static surface.

5. Locate the slot in which you will install the DIMM (shown in Figure 3-6).

Spread the two retaining clips outward (see Figure 3-7).

Bank 1

Bank 2

Bank 3

Bank 4

Figure 3-6. DIMM Slot Location

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Pas de commentaire

HP Network Cables LH 3 Manuel d'utilisateur Page 24