HP VMA-series Memory Arrays Manuel d'installation télécharger pdf (Page 37)

Figure 7 : Supported Redundant Pair VMA SAN Gateway Configurations

Redundant VMA SAN Gateway Pair with one

VMA Array

DL380 G7 Gateway

Redundant VMA SAN Gateway Pair with two

VMA Arrays

DL380 Gen8 Gateway

TOP

PCIe x8

To FC SAN

switch #1

To FC SAN

switch #2

Primary

Gateway

Second

Gatew

1200W

PLC B

94%

1200W

PLC B

94%

Restart the Secondary Gateway and Verify Media Enabled

Press the power button on the front of the ‘secondary’ gateway to restart the gateway. When the

‘secondary’ gateway boots up, it should now have full connectivity of the dually connected VMA

Arrays, array container configuration, LUNs, FC and Ethernet port settings. The ‘secondary’ gateway

will present the new FC lunpaths to all LUNs as configured by FC target and initiator port settings in

the configuration database of the current ‘master’ gateway which is currently the ‘primary’ gateway.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Pas de commentaire

HP VMA-series Memory Arrays Manuel d'installation Page 37