HP Compaq dc5700 Guide de l'utilisateur télécharger pdf (Page 32)

Installing an External 5.25-inch or 3.5-inch Drive

NOTE An optical drive is a CD-ROM, CD-R/RW, DVD-ROM, DVD+R/RW, or CD-RW/DVD

Combo drive.

The system does not support Parallel ATA (PATA) optical drives.

1. Install the four guide screws (two on each side) that were removed from the old drive into the new

drive. The screws help guide the drive into its proper position in the bay. Extra guide screws are

provided on the front of the chassis under the front bezel.

Figure 2-18 Installing Guide Screws (Optical Drive Shown)

NOTE There are a total of eight extra guide screws on the front of the chassis under the

bezel. Four have 6-32 standard threads and four have M3 metric threads. Standard screws

are used for hard drives and have a silver finish. Metric screws are used for all other drives

and have a black finish. Make sure to install the appropriate guide screws into the drive.

2. Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until

the drive snaps into place.

Figure 2-19 Sliding the External Drives into the Drive Cage

26 Chapter 2 Hardware Upgrades ENWW

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Pas de commentaire

HP Compaq dc5700 Guide de l'utilisateur Page 32