HP 4540s Spécifications télécharger pdf (Page 106)

Battery cable

The battery cable is included in the Cable Kit, spare part number 683477-001 for 4540s models,

684640-001 for 4440s/4441s models.

Before removing the battery cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 55).

5. Remove the following components:

a. Bottom door (see

Bottom door on page 58).

b. Keyboard (see

Keyboard on page 70)

c. Top cover (see

Top cover on page 82)

Remove the battery cable:

1. Position the computer upright.

2. Disconnect the battery cable connector from the system board (1).

3. Remove the two Phillips PM2.5×4.5 screws that secure the cable to the computer (2).

4. Remove the battery cable from the computer (3).

Reverse this procedure to install the battery cable.

98 Chapter 4 Removal and replacement procedures

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 173 174

Pas de commentaire

HP 4540s Spécifications Page 106