Hp XB3000 Manuel d'utilisateur télécharger pdf (Page 32)

2–4 Maintenance and Service Guide

Troubleshooting

Table 2-3

External Device Problems and Solutions

Problem Possible Cause Solution

The print driver was

successfully installed,

but I am unable to print.

The wrong print

processor may be

selected.

1. Select Start >

Printers and Faxes.

2. Right-click the

printer icon and click

Properties.

3. Click the Advanced

tab and click Print

Processor.

4. Change the print

processor to

WINPRINT.

5. Click OK.

A new device is not

recognized as part of

the system.

The computer may be

properly aligned, but is

not fully seated or

docked in the

expansion base.

Lift the computer away

from the expansion base.

Then realign the

computer visual

alignment indicator with

the indicator on the

expansion base, and

reconnect the computer.

Be sure that the

computer is properly

aligned and seated, and

fully docked by gently

pressing down on the

computer until you hear

a click. If accessories are

attached, they should

now be recognized by

the system.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 78 79

Commentaires sur ces manuels

Pas de commentaire

Hp XB3000 Manuel d'utilisateur Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Carnets de notes Hp XB3000