Hp OmniBook 800 Notebook PC Manuel d'utilisateur télécharger pdf (Page 20)

Using the Docking System

Making Connections

1-20

To switch back to the OmniBook pop-out mouse

Use this procedure to switch back to the built-in OmniBook mouse from an external

mouse.

1. Save your work.

2. Disconnect the mouse cable from the docking system.

3. Reboot the OmniBook.

To connect an external display

Use this procedure to connect an external display to your OmniBook. Before

beginning, check the documentation for your display and make sure that the

external display supports standard VGA or super VGA format.

1. Plug the VGA cable from the external display into the VGA connector at the

back of the docking system.

2. Dock the OmniBook.

The OmniBook automatically recognizes and activates the external display. The

built-in display turns off. If you want to run the built-in display and an external

display simultaneously, see the following procedure for instructions.

VGA connector

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Pas de commentaire

Hp OmniBook 800 Notebook PC Manuel d'utilisateur Page 20