HP OmniBook 800CS/CT Manuel d'utilisateur télécharger pdf (Page 76)

6. Replace the two Keyboard Screws and the remainder of the components and reboot.

Hard Disk Drive Breather Holes

Hard drives used in the OmniBook 800 have a breather hole located on the metal side of the

drive (see Figure 26 for location of breather holes for both IBM



and Toshiba). The hole is

necessary to provide pressure equilibrium. The breather holes must not be obstructed. Any

labels covering this breather hole must be removed to prevent data loss on the hard drive.

Just below the metal surface of the drive, a white material can be seen through the breather

hole. This is a filter and should not be disturbed. A drive with this filter damaged should be

considered defective.

Figure 26 - IBM and Toshiba Hard Drive Breather Holes (respectively)

Breather

Holes

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 118 119

Pas de commentaire

HP OmniBook 800CS/CT Manuel d'utilisateur Page 76