HP P3005dn Guide de l'utilisateur télécharger pdf (Page 362)

100

101

NOTE This process keeps the clock from drifting (losing or gaining time), but does not

synchronize the clock with the network time server clock.

1. Select the Enable Clock Drift Correction check box.

2. In the Network Time Server Address field, type the TCP/IP address of the clock which you want

to use for correction of the product clock drift.

NOTE Alternatively, you can click the Automatically Find Server button to find a time

server on your network and automatically fill in this field.

3. In the Local Port to Receive Time from Server field, type the number of the appropriate port.

4. Click OK.

NOTE Use this screen only to configure the time server for clock drift correction, not to set the

clock. To set the clock, use the main Date & Time screen. For further information, see

Date &

Time on page 336.

Wake Time

An IT administrator can use the Wake Time screen to schedule product wakeups on a daily basis. For

example, the product can be set to wake up at 07:30, so the product has finished initializing and

calibrating and is ready to use by 08:00. The administrator sets only one wakeup setting per day;

however, each day can have a different wakeup setting. Additionally, to save energy, the sleep delay

can be set to turn the product off after a specific period of inactivity.

Figure 6-72 HP EWS – Wake Time screen

Networking tab

The HP EWS Networking tab is shown in the following figure.

338 Chapter 6 Macintosh ENWW

1 2 ... 357 358 359 360 361 362 363 364 365 366 367 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

HP P3005dn Guide de l'utilisateur Page 362

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimantes laser/LED HP P3005dn