HP B-series Embedded Switches Manuel d'utilisateur télécharger pdf (Page 129)

The SAN Management Application

129Fabric OS Procedures Version 3.1.x/4.1.x User Guide

2. At the command line enter the msconfigure command. The command

becomes interactive.

3. At the select prompt enter 2 to add a member based on its Port/Node WWN.

4. At the prompt enter the WWN of the member you would like to add to the

ACL. Press the Return key, and the main menu is displayed.

5. At the prompt enter 1 to verify the WWN you entered was added to the ACL.

6. Once you have verified that the WWN was added correctly, enter 0 at the

prompt to end the session.

7. At the “Update the FLASH?” prompt enter Y.

8. Press Enter to update the flash and end the session.

Example:

switch:admin> msconfigure

0 Done

1 Display the access list

2 Add member based on its Port/Node WWN

3 Delete member based on its Port/Node WWN

select : (0..3) [1] 2

Port/Node WWN (in hex): [00:00:00:00:00:00:00:00]

*WWN is successfully added to the MS ACL.

0 Done

1 Display the access list

2 Add member based on its Port/Node WWN

3 Delete member based on its Port/Node WWN

select : (0..3) [2] 1

<< Continued on next page.>>

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 269 270

Pas de commentaire

HP B-series Embedded Switches Manuel d'utilisateur Page 129