HP NC320T Manuel d'utilisateur télécharger pdf (Page 17)

Specifications

UTP Cable Specifications

For 1000BASE-T transmission, the cable must be:

•

Category 5 UTP or better

22-26 AWG, 100Ω @ 1MHz

EIA/TIA 568a or EIA/TIA 568b

Using UTP Category 5 Cable in Gigabit over Copper Installations

For Gigabit over copper installations, Category 5 UTP or better 1000BASE-T cable must

comply with the IEEE 802.3ab 1000BASE-T standard. For new installations, Category 5e

(enhanced Category 5) or better cable is recommended.

RJ-45 Pinouts and Crossover Function

The Ethernet standard also specifies that each segment implement a crossover function to

connect the transmitter of one device to the receiver of a device at the other end, and vice-

versa. The crossover function may be implemented internally at the hub or switch, or

externally through the twisted-pair media.

C-2 HP NC320T PCI Express Gigabit Server Adapter User Guide

1 2 ... 12 13 14 15 16 17 18 19 20 21

Pas de commentaire

HP NC320T Manuel d'utilisateur Page 17