HP 10.8TB Manuel d'installation Page 1

Naviguer en ligne ou télécharger Manuel d'installation pour Mise en réseau HP 10.8TB. HP 10.8TB Setup and Install Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 6
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
HP StoreEasy 5000 Storage
Quick Start Guide
Abstract
IMPORTANT: Read this document first.
© Copyright 2012, 2013 Hewlett-Packard Development Company, L.P.
*B7E02-96027*
HP Part Number: B7E02-96027
Published: June 2013
Edition: 2
The HP StoreEasy 5000 Storage is the general name
for several 5xx0 hardware-software solutions. The
Microsoft Windows Storage Server 2012 Standard
Edition operating system is preinstalled and activated
on all systems. The instructions in this guide apply to
all HP StoreEasy 5000 Storage models unless
otherwise noted.
Each storage system features HP server blades and
dense disk storage combined in a single 3U chassis
(Figure 1 (page 1)).
Figure 1 HP StoreEasy 5000 Storage front view
2. Server blade 1, OS drives1. Disk drive
4. Server blade 2, Bay 23. Server blade 1, Bay 1
6. Chassis fault LED5. Server blade 2, OS drives
Figure 2 (page 1) shows components referenced
elsewhere in this guide.
Figure 2 HP StoreEasy 5000 Storage rear view
2. HP 2-port 10 Gb I/O module
(2); these modules connect to
1. System fans (redundant)
the integrated NIC located on
each server blade motherboard.
4. Drive fans (redundant)3. Intraconnect (internal switch
connecting EMU)
6. Power button5. SAS I/O module (2)
Page 1
Vue de la page 0
1 2 3 4 5 6

Résumé du contenu

Page 1 - Quick Start Guide

HP StoreEasy 5000 StorageQuick Start GuideAbstractIMPORTANT: Read this document first.© Copyright 2012, 2013 Hewlett-Packard Development Company, L.P.

Page 2 - Validate network information

8. HP 4–port, 1 Gb EthernetPCI-e module7. Power supply (2)10. Management port for iLO(servers 1 and 2), and EnclosureManager Unit (EMU)9. HP 2-port, 1

Page 3 - Power on the storage system

Table 2 Validation tests (continued)Successful?(Y/N)Command(s) to executeTestping <domain controlleraddress>ping <domain controllername>Pi

Page 4 - Access the storage system

2. Power on the storage system by pushing thepower button (6, Figure 3 (page 3)) on the backof the chassis.NOTE: Approximately 30 seconds afterthe sto

Page 5

connected to your network, and iLO addressesconfigured appropriately.NOTE: HP BladeSystem c-Class KVM InterfaceAdapters are not supported.The server f

Page 6 - Documentation feedback

Supporting documentation• HP StoreEasy 5000 Storage Administrator Guide• HP StoreEasy 5000 Storage Release Notes• HP 3U Storage System Rail Kit Instal

Commentaires sur ces manuels

Pas de commentaire