HP AdvanceStack Router 230 Manuel d'installation Page 93

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 144
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 92
Other Standard Cables
Cable and Connector on Router Connector on Attached Device Standard Cable or Cable Solution
Token ring, shielded, twisted-pair cable
connecting to the 9-pin female token
ring port with a male 9-pin
subminiature D-connector
For a medium interface
connector (MIC) conforming to
IEEE 802.5 specifications for
connection to a trunk coupling
unit (TCU)
Available from several vendors, such
as Black Box and Inmac.
Not offered by Hewlett-Packard.
RS-232 modem cable for a modem
connecting to console port
For 25-pin female or male port Use a standard (straight-through)
modem cable.
RS-232 cable for a terminal or PC
connecting to console port
2
For 25-pin male port Attach a null modem adapter
1
(Tandy
Null Modem Adapter No. 26-1496 has
been tested) to the console port. Then
attach a straight-through modem cable
to the null modem adapter.
For 9-pin male port Use a Black Box PC/AT Serial Printer
Cable (EVNBPC has been tested).
OR
Attach a null modem adapter (Tandy
Null Modem Adapter No. 26-1496 has
been tested) to the console port. Then
attach a modem cable (Black Box
Cable EVNBMC and Cablex PC Modem
Cable have been tested) to the null
modem adapter.
1
The required minimum pin-out is listed in the next section, ‘‘Cable/Connector Pin-Outs’’.
2
Signals DTR (pin 20) and RTS (pin 4) must be on, or high, on your terminal or in your terminal emulation program.
3
Two cables are required for dual attachment to another HP router having an FDDI port or an adjacent DAS.
Cables and Connectors
Other Standard Cables
A-4
Vue de la page 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 143 144

Commentaires sur ces manuels

Pas de commentaire