HP TippingPoint Next Generation Firewall Series Guide de l'utilisateur Page 43

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 58
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 42
Security Management System CLI Reference 33
pkg
Collection of attribs used to control package management.
Related Object
tmc (object)
Table 3-12 ntp Attributes
Attribute Description Type Access Range
ntp.server1
ntp.server2
ntp.server3
Attribs used to specify a list of NTP time
servers. The value may be a dotted IP
address or a hostname. The first entry
(ntp.server1) will be assigned the preferred
time server role. The preferred time server is
also used as a step ticker, which adjusts the
time immediately upon system boot.
To clear this value, use a period (.).
IPaddr read-write 0
ntp.auth-enable
Attrib used to enable/disable the NTP
authentication. It allows the NTP client to
verify that the server is known and trusted
and not an intruder intending to
masquerade as that server. We only
support NTP V3 (symmetric key)
authentication.
To enable the NTP authentication, set the
value to
yes, and a key id and key value
should be provided with the ntp.auth-keyId
and ntp.auth-keyValue attribs.
To disable the value, set it to
no.
Example:
set ntp.auth-enable=yes
Bool read-write 0
ntp.auth-keyId
The ID of key which is used to authenticate
NTP server if the NTP authentication is
enabled. The ID has to exist in
/etc/ntp/keys before you set this value.
To clear this value, use a period (.).
Example:
set ntp.auth-keyId=1
Int read-write 1-6553
5
ntp.auth-keyValue
The value of key which is used to
authenticate NTP server if the NTP
authentication is enabled. The key has to
exist in
/etc/ntp/keys before you set this
value.
To clear this value, use a period (.).
Example:
set ntp.auth-keyValue=test
String read-write 1-255
Vue de la page 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 57 58

Commentaires sur ces manuels

Pas de commentaire