HP 2133 Mini-Note Spécifications télécharger pdf (Page 80)

To remove the display assembly for model 2133:

1. Remove the wireless antenna cables (1) from the clips and routing channels built into the base

enclosure.

CAUTION: The display assembly will be unsupported when the following screws are removed.

To prevent damage to the display assembly, support it before removing the screws.

2. Remove the two T8M2.5×5.0 screws (2) and the four Torx8 T8M2.5×10.0 screws (3) that secure

the display assembly to the computer.

3. Lift the display assembly (4) straight up and remove it.

To remove the display assembly for model 2140:

1. Remove the wireless antenna cables (1) from the clips and routing channels built into the base

enclosure.

CAUTION: The display assembly will be unsupported when the following screws are removed.

To prevent damage to the display assembly, support it before removing the screws.

2. Remove the four silver Phillips PM3.0×3.0 screws (2), the silver Phillips PM 4.5×8.0 screw (3), and

the black Phillips PM 2.0×8.0 screw (4) that secures the display assembly to the computer.

72 Chapter 4 Removal and replacement procedures

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 129 130

Pas de commentaire

HP 2133 Mini-Note Spécifications Page 80