HP 5900 Guide d'installation télécharger pdf (Page 12)

3. Align the two-hole grounding lug at one end of the cable with the grounding holes of the grounding

point, insert the grounding screws into the holes, and tighten the screws with a screwdriver to attach

the grounding lug to the chassis, as shown in Figure 6.

NOTE:

 HP recommends that you use the primary grounding point or auxiliary grounding point 1 because the grounding

cable and grounding screw that come with the switch are suitable only for these two grounding points.

 To use auxiliary grounding point 2 on the HP 5900AF-48XG-4QSFP+ switch, you must prepare a grounding cable

yourself.

Figure 6 Attaching the rear mounting brackets/chassis rails/grounding cable to the chassis

Figure 7 Attaching the front mounting brackets/chassis rails to the chassis

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Pas de commentaire

HP 5900 Guide d'installation Page 12