HP Compaq 6005 Pro MT Spécifications rapides Page 37

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 65
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 36
System Memory Support
The HP Compaq Pro 6300 Business PC supports the 2nd and 3rd generation Intel® Core™ processor families. Based on a new PC micro-
architecture, the processor is designed for a two-chip platform consisting of a processor and Platform Controller Hub (PCH). Unlike
previous generations, the processor includes an integrated memory controller (IMC). The IMC supports DDR3 protocols with two
independent, 64-bit wide channels each accessing one or two DIMMs.
Two channels of non-ECC DDR3 unbuffered dual in-line memory modules (UDIMM) or DDR3 unbuffered small outline dual in-line
memory modules (SO-DIMM) with a maximum of two DIMMs per channel
Single-channel and dual-channel memory organization modes
Data burst length of eight for all memory organization modes
DDR3 memory data transfer rates of up to 1600 MT/s; actual supported DDR3 data transfer rate determined by the configured
processor.
64-bit wide channels
DDR3 system memory I/O voltage of 1.5V
Theoretical Maximum Memory Bandwidth:
10.6 GB/s in single-channel mode of 21.3 GB/s in dual-channel mode assuming DDR3 1333 MT/s
12.8 GB/s in single-channel mode or 25.6 GB/s in dual-channel mode assuming DDR3 1600 MT/s
32 GB maximum memory support depending upon available number of DIMM sockets
DDR3-1600 (PC3-12800) DIMMs are supported but limited to the 1333 MT/s data transfer rate when not configured with
IvyBridge generation chipset.
CAUTION:
You must shut down the computer and disconnect the power cord before adding or removing memory modules. Regardless
of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged in to an active AC outlet.
Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board.
Memory Configurations:
Slot 1 is black and must always be populated. Not all memory configurations possible are represented below.
NOTE:
For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available due to
system resource requirements. Addressing memory above 4 GB requires a 64-bit operating system.
Total Memory
Socket
Channel A
Channel B
1 (black)
2 (white) 3 (white) 4 (white)
2 GB
2 GB
unpopulated
Unpopulated
unpopulated
4 GB
(dual channel)
2 GB
unpopulated
2 GB
unpopulated
8 GB
(dual channel)
2 GB 2 GB 2 GB 2 GB
16 GB
(dual channel)
4 GB 4 GB 4 GB 4 GB
QuickSpecs
HP Compaq Pro 6300 Business PC
Technical Specifications – Memory
DA - 14269 North America — Version 26 — March 8, 2013
Page 37
Vue de la page 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 64 65

Commentaires sur ces manuels

Pas de commentaire