HP NetServer LXr 8000 Spécifications télécharger pdf (Page 9)

Chapter 1 Introduction

NOTE Until you receive the Compaq rack-optimized front bezel,

control panel bezel, and LCD cover:

• Leave the HP-optimized control panel bezel in place.

• Do not close the front door (if any) of the Compaq rack

because it would interfere with the HP-optimized control

panel bezel.

• Do not remove the HP-optimized front bezel.

Order of Installation Operations

What you do when depends on whether you have received the Compaq

rack-optimized kit when you first install the HP NetServer in the Compaq rack.

Table 1-1 summarizes the following two alternatives:

l Received Kit: If you already have received the Compaq rack-optimized

kit, proceed through Chapters 2, 3, and 4 to prepare the HP NetServer,

prepare the Compaq rack, and install the HP NetServer in the rack.

l Awaiting Kit: If you want to install the HP NetServer in the Compaq rack

before you receive the Compaq rack-optimized kit, refer to Chapters 3 and

4 to prepare the Compaq rack and install the HP NetServer in the rack.

After you receive the kit, refer to Chapters 2 and 4 for installation

instructions.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 49 50

Pas de commentaire

HP NetServer LXr 8000 Spécifications Page 9