HP StorageWorks 20 - Modular Smart Array Guide de l'utilisateur télécharger pdf (Page 58)

58 HP StorageWorks 2012fc Modular Smart Array user guide • March 2008

Mapping a Data Host to a Volume

To enable a data host to access a volume you created, you must map the volume to

the host. The port World Wide Name (WWN) of each host connected to the system

is automatically added to the system’s global host port list.

Before mapping a data host to a volume you must identify the data host’s port

WWN and a LUN that the host is not using.

To map a data host to a volume:

1. Select Manage > Volume Management > Volume Mapping > Map Hosts To

Vo l u m e .

Notice that your first virtual disk and its volume are selected, and the volume’s host

mapping values are set to None.

2. In the Assign Host Access Privileges panel:

a. Select the host port WWN value that you identified before beginning.

b. Type the LUN that you identified.

Notice that the mapped host will have read-write access through all controller

host ports.

c. Click Map It.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Pas de commentaire

HP StorageWorks 20 - Modular Smart Array Guide de l'utilisateur Page 58