HP t5710 - Thin Client Guide de l'utilisateur télécharger pdf (Page 18)

2-6 www.hp.com Hardware Reference Guide

Hardware Upgrades

6. Restore power to the thin client and turn it on.

7. Install the thin client firmware. For installation instructions, refer

to the Troubleshooting Guide or the HP Compaq Thin Client

Imaging Tool white paper available on the HP website at

www.hp.com/products/thinclientsoftware.

SODIMM Upgrade

If the thin client can be upgraded with an optional SODIMM module,

use the following instructions as an overview of this procedure.

CAUTION: If necessary, back up any data before continuing the

installation.

✎

In addition to following these instructions, follow the instructions that

are applicable to the specific thin client option.

1. Complete steps 1 through 4 of the “General Hardware Installation

Sequence” on page 2-1.

2. Remove any existing SODIMM if one is installed.

3. Install the module into the socket at a 45° angle 1 until it clicks,

then rotate the module 2 into position as shown.

Installing an Optional SODIMM

4. Complete steps 6 through 10 of the “General Hardware

Installation Sequence” on page 2-1.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Pas de commentaire

HP t5710 - Thin Client Guide de l'utilisateur Page 18