HP PSC-500 Manuel d'utilisateur télécharger pdf (Page 23)

2-1

Sharing HP PSC 500 on

a Network

This chapter explains how to set up the HP PSC 500 and your computers for

network printing using Windows 95/98 or NT 4.0, or a combination of the

two on a point-and-print or peer-to-peer network.

NOTE

Your computers must already be networked to use this procedure. HP does not

provide support for networks. See your Windows Help system for assistance.

HP PSC 500 does not support scanning over a network.

The Jet Direct 170X Print

Server may or may not provide network printing and limited scanning capabilities. For

more information, see the HP Web site at: http://www.hp.com/go/all-in-one.

Understanding Point-and-Print and Peer-to-Peer Networks

Point-and-print

network

refers to an environment where two or more

computers (Windows 95/98 or NT 4.0) equally share a single resource, such

as the HP PSC 500, and the server computer automatically downloads the

required software to the client computer. If your network uses a Windows 95/

98 computer as the server with Windows NT 4.0 clients, you must use a

peer-

to-peer

network configuration instead. A peer-to-peer network is the same

except that the software must be manually installed on each Windows NT 4.0

client.

Local Area Network (LAN) Access

Before you can set up printer sharing, a network must already exist.

WLSG.book Page 1 Thursday, March 9, 2000 2:26 PM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Pas de commentaire

HP PSC-500 Manuel d'utilisateur Page 23