HP Professional 5100 Guide de l'utilisateur télécharger pdf (Page 145)

automatic two-sided printing problems

(if optional Two-Sided Printing Accessory is attached to printer)

paper jam occurs inside the two-sided printing accessory

See paper jam for instructions.

option for two-sided printing cannot be selected

Verify the following:

● The Two-Sided Printing Accessory (duplexer) is attached to the printer.

● The duplexer is enabled in the printer software.

● The media type and size selected in the Paper/Quality tab are supported by the

duplexer.

See the documentation that came with the duplexer for a list of supported

media types and sizes.

only one side of the page prints when the two-sided printing option is enabled

Verify the following:

● The correct print options are set in both the printer software and the

application you are using.

● The photo paper is not curled, if you are printing on two-sided photo paper.

Photo paper should be flat before printing. See storing and handling photo

paper for more information.

● The media type and size selected in the Paper/Quality tab are supported by the

duplexer.

See the documentation that came with the duplexer for a list of supported

media types and sizes.

If the media type or size is not supported by the duplexer, you can print the

document using the

manual two-sided printing feature.

binding margin is in the wrong place

1. Open the Printer Properties dialog box.

2. Select the Finishing tab.

3. Verify that:

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 172 173

Pas de commentaire

HP Professional 5100 Guide de l'utilisateur Page 145