HP Value Serial/USB Receipt Printer II Manuel d'utilisateur télécharger pdf (Page 15)

Chapter 1: Diagnostics and Conguration

Communication interface settings

Tochangethecommunicationinterfacesettings,enterthecongurationmenu,select“SetCommunicationInterface”from

the main menu.

Caution: Be extremely careful changing any of the printer settings to avoid inadvertently changing other settings that

might affect the performance of the printer.

Pressthepaperfeedbuttonasinstructedonthecongurationmenutoselectthesettingsyouwanttochange.

• Baudrate

  115200baud

  57600baud

  38400baud

  19200baud

  9600baud

4800 baud

  2400baud

  1200baud

• Parity

  NoParity

  EvenParity

  OddParity

• Flowcontrolmethod

  Software(XON/XOFF)

  Hardware(DTR/DSR)

• Datareceptionerrors

  Ignoreerrors

  Print“?”

• AlternateDTR/DSR

  Enabled

Disabled

• USBDriver

Printer Class

Comm Class

• USBNAK

  RejectPacketsWhenError

  AcceptPacketsWhenError

Note: Press the paper feed button for at least one second to validate the selection.

For more information about See this section

Setting the RS-232C Serial interface settings “Conguring the printer” on page 14

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 154 155

Pas de commentaire

HP Value Serial/USB Receipt Printer II Manuel d'utilisateur Page 15